PicoScope Accessories

Shopping Cart

Your Cart is Empty

Quantity:

Subtotal

Taxes

Shipping

Total

PicoScope Accessories

There are many Accessories to choose from to Enhance your Diagnostic Experience with the PicoScope Automotive Oscilloscope.

Coloured Test Leads:

WPS500X Pressure Transducer:

CAN Test Box:

BNC to 4mm Adaptor:

BNC to 4mm Adaptor: For SNAP-ON Verus

Fuse Extension Leads:

Coil on Plug Probe:

PicoScope NVH Kit

All of the accessories that are included in any of the PicoScope kits are also available to purchase seperately.

There are also many extra and Advanced accesories available to use with the PicoScope.

These Include:-

Coloured Test Leads
WPS500X Pressure Transducer

Allows you to Look at the following

Running Compression
Compression Testing
Fuel Pressure
Intake Testing
Exhaust Pulses
Oil Pressure

Example Running Compression Waveform

CAN Test Box

Be able to test CAN Bus, K-Line, Tach Signal and many more just by simply connecting to the 16-pin DLC connector. Allows Scan Tool to interface to be able to check live data and fault codes whilst checking live signals through the CAN Test Box.

BNC to 4mm Adaptor

Be able to use existing equipment from other OEM Scopes that have a 4mm connection oppose to BNC connection.

BNC to 4mm Adaptor for SNAP-ON Verus

LMH Engineering Services can supply this adaptor so you can use the PicoScope Accessory range on your SNAP-ON Verus.

Fuse Extension Leads

Great for Quick and Easy diagnostics directly from the vehicles fuse box.

Example Waveform taken at a Fusebox

There are many more accessories available. You can take a look at our Online Catalogue for many more accessories to make the PicoScope a much more powerful Diagnostic Tool

Online Catalogue

Click here to view our Online Catalogue

PicoScope Example Waveforms, Videos & Software

Click here to see Example Waveform's captured using the PicoScope

Click here to see YouTube videos showing the use of PicoScope

Click here to download the PicoScope Software

What are Pico Diagnostic Kits

The Pico Automotive Diagnostics Kits work with your PC to measure and test virtually all of the electrical and electronic components and circuits in any modern vehicle including:

Ignition (primary and secondary)
Injectors and fuel pumps
Starter and charging circuits
Batteries, alternators and starter motors
Lambda, airflow, ABS and MAP sensors
Electronic throttle control
CAN bus, LIN bus and FlexRay

PicoScope is like no other oscilloscope with features and benefits that make it the world's leading choice for vehicle manufacturers and aftermarket garages alike.

Need Support?

Have you recently just bought a Scope and need help setting it up or need to view the User Manual.

Thinking of purchasing a scope and would like to see Example Waveforms and Videos?

Check out our Support Page which will quickly take you to where you need to be or to view Technical Articles and Case Studies.

Click here to view our Support Page.

PicoScope Future Proof!

The recently introduced two-channel PicoScope 4225 and four-channel PicoScope 4425 are our 5th generation of automotive PC oscilloscopes. They are 5x faster and have 8x more memory than the previous generation, ensuring they are powerful enough for the next generation of vehicles with new technologies such as CAN FD.

Other innovations include new floating inputs for non-grounded measurements, higher input ranges and ConnectDetect to ensure you have a good connection. The new PicoScopes are also now USB 3.0 connected and powered.

When you purchase any diagnostic tool you not only spend money but you also spend time learning how best to use it. We help to protect that investment in two ways. First, we develop hardware and software that is easy to use for those starting out with oscilloscopes yet has the power and features demanded by experienced users. Second, we do not compromise on quality or specifications - expect the PicoScope you buy today to still be an essential part of your diagnostic tool box 10 years from now.

PicoScope Accessories